Infrared heaters — comfortable warmth in a country house

The benefits of civilization have not yet reached all corners of the planet, but many things are simply necessary for people. As they write on the site about heating x-teplo, a person strives for comfort, and it is impossible to provide it without a proper temperature regime.. However, even many country houses do not always have central heating, which is an integral part of city life. And in country houses it is most often not carried out at all. In summer, of course, it is warm and good, but some owners prefer to start the summer cottage as early as possible and finish as late as possible. Both spring and autumn frosts are possible, and here you cannot do without heating. What to do in this case? Electric infrared heaters available.

Such heaters can be used in greenhouses, houses and apartments, on balconies, loggias, in utility rooms and garages. We will tell you more about the use of these devices in country houses and greenhouses..

Let’s start with the houses. Typically, country houses have a stove or fireplace. However, they have a significant drawback — the larger and more powerful the fireplace or stove, the longer it takes to warm it up. In addition, with this method of heating the house, it is impossible to control the temperature. Liquid heating systems require careful maintenance and reach the desired temperature over time. Therefore, more and more owners of country houses give preference to electric heaters, in particular infrared. What is the reason?

Infrared heaters are equipped with a thermostat, which will not only maintain the temperature evenly throughout the room, but also save energy — just 50-100W is enough per square meter of the room..

Traditional heating systems are of the convection type — heated air is distributed throughout the room using convection flows. In this case, the heating of the room is uneven, and it will be warmest at the heater and at the ceiling. Infrared heaters are equipped with a thermostat, which will not only maintain the temperature evenly throughout the room, but also save energy — just 50-100W per square meter of room is enough. So, in a room of 10-12 meters, you can install a heater with a capacity of 600-800 W, and in a room up to 20 m — 1000-1300 W. If the walls are well insulated, then the heater can be switched off periodically, which will save 50-70% of electricity.

Now about the greenhouses. Plants do not like low temperatures, and even the most modern greenhouse will not protect them from frost, be it sharp negative temperatures or a drop to 0-20C. And here infrared heaters can come to the rescue. Their action is similar to the action of the sun’s rays, they create the most natural and comfortable conditions for plants. For example, they provide soil heating up to 5 cm, which stimulates the growth of the root system and is impossible when using other heaters. In a standard greenhouse of 3×6 m, only two heaters with a capacity of 800-100 W and one thermostat can be used. At the same time, on the latter, you can set the activation threshold, which will ensure automatic activation of the heaters if the temperature drops below the set value. However, infrared heaters can only be installed in greenhouses covered with glass or plastic..

How to choose the right infrared heater?

First of all, consider the correspondence of the power of the device to the area of ​​the room. Insufficient power does not allow the room to warm up to the desired level, no matter how long the device works. On the other hand, you can purchase devices with a power reserve — in this case, it will take less time to warm up the room..

Second. The network to which the heater is connected must be sized for the power consumed by it. In rooms with an area of ​​up to 20 square meters, the infrared heater can be plugged into a regular socket. Larger rooms will require additional wiring.

Third. The mains voltage should be 210-230 Volts. At lower voltages, the efficiency of the heater is significantly reduced. If your home has a network with a voltage of, for example, 180 volts, use voltage stabilizers.

Fourth. Remember that infrared heaters are predominantly installed on the ceiling, as this will maximize the efficiency of the appliance. With other installation methods, the performance of the heater is significantly reduced.

And the last thing. Remember that even when planning to buy an electric heater, in no case should you refuse to insulate your house..